Special Hazards

	Fenwal FM-200 Fenwal FM-200 is an environmentally-friendly, rapid extinguishing agent which offers the most versatile clean agent suppression capabilities available for facilities that cannot afford fire-related business interruptions. Active on fire, but inert on people (non-toxic when used in accordance with NFPA Standard 2001) FM-200 leaves no residue on Class A, B, and C fires. With Fenwal, every FM-200 system is checked for design accuracy. FM-200 systems provide maximum protection with minimum hardware, requires minimal space, and are extremely cost effective. FM-200 systems are UL listed and FM approved.
	Fenwal Phoenix The Fenwal Phoenix Series Systems use a unique method for propelling the FM-200 agent from the storage cylinder through the piping system and out of the discharge nozzles. Nitrogen gas pressure from a separate storage cylinder is introduced into the vapor space of the FM-200 cylinder at a controlled rate. This nitrogen pressure acts to propel the liquid FM-200 agent through the pipe network allowing for the placement of storage cylinders remotely from the protected hazard. Fenwal Phoenix Series FM-200 Systems are extremely well suited to applications involving remote agent storage and situations which limit maximum pipe size to be used. The Phoenix System is capable of smaller pipe sizes to discharge large quantities of FM-200. This system can be sucessfully applied to many existing Halon 1301 systems as a drop in agent, to a new agent with long-term availability.
	Secutron Fire Systems SECUTRON fire alarm systems provide both conventional and analog addressable controls for life safety systems. Click here for more information
	Protectowire Fire Systems The Protectowire Company, Inc. is the originator and worldwide leader in the manufacture of Linear Heat Detectors and Special Hazard Linear Heat Detection Systems. Our solutions include complete alarm systems for fire detection suitable for a vast array of industrial and commercial applications. Click here for more information
	Gamewell Fire Alarm Systems Aven Fire Systems, Inc. offers a complete line of state-of-the-art fire alarm equipment manufactured by Fenwal & Gamewell. Systems range from small, conventional zoned systems to microprocessor-based/software controlled systems, to an intelligent, fully addressable system. Perhaps you need a central alarm panel to monitor other systems such as sprinklers, gaseous suppression, or water detection. Whatever the case, we can design, install, and service a system to meet your needs.
	Cadgraphics High-tech software for fire and security alarms. Our software can also help you with facility management, integrated building systems, and homeland security. Cadgraphics lets you access all of the data from every fire and security alarm and "smart" device in your building in a single, streamlined interface that's easy to read and understand. Click here for more information
	Foam Suppression Systems National Foam, part of the Kidde Fire Fighting organization, is a manufacturer of Foam Concentrate, Foam Proportioning Systems, Foam Fire Fighting Equipment, Monitors, Nozzles, Foam Pumpers, Aerials and Tankers. National Foam has historically been at the forefront of foam fire fighting and fire control technology and is the acknowledged world leader in providing foam based solutions. Other brands associated with National Foam include; Feecon, offering airport crash rescue and general mobile fire fighting equipment and Wirt Knox, offering a range of hose racks, reels, carts and general hose storage accessories. All National Foam products are designed, tested, and listed to perform together. The Foam agents, storage tanks, proportioning equipment, and discharge devices provide a reliable system. National Foam 's quality products, coupled with Aven Fire Systems first rate service and maintenance, will allow you to rest easy knowing you're protected. Applications include: Hangars, Heliports, Fuel Storage & Loading Racks, etc...
	Chemetron Fire Systems CO2 is fast, efficient, cost-effective and adaptable for a wide range of hazards. The discharge of CO2, a low cost clean agent, is non-damaging to property and electrically non-conductive. Click here for more information
	Recommended for protection of unoccupied facilities. Economical, computer-designed and engineered; using total flooding, hand hose line and/or local application. Click here for more information.
	Range Guard - Wet Chemical System Fire Suppression System for Commercial Cooking Applications. Range Guard’s pre-engineered design gives you optimal versatility, safety, and effectiveness. This system offers inexpensive hardware, fast system installation and cost-effective system maintenance and upgrades. Click here for more information on Badger's Range Guard System.
	Industry Guard System Badger’s Industry Guard Dry Chemical Fire Suppression System uses dry chemical compounds that, pound for pound, suppress more fire than any other agent. Industry Guard’s flexible, pre-engineered systems are easy and affordable to install and maintain in virtually any industrial setting. Click here for more information on Badger's Industry Guard System.
	Room Integrity Testing / Technicians A leaky room is the downfall of any clean agent fire protection system. The new NFPA room integrity test is a procedure developed to locate the sources of leaks and predict retention time, without discharging the agent utilizing Retrotec hardware and software. Our factory-trained technicians perform acceptance tests and periodic retests. Complete inspection, testing, and repair of all types of systems. Inspection, testing, and repairs of fire/life safety systems to comply with authorities having jurisdiction. Aven Fire Systems, Inc technicians are all factory trained and NICET certified in the installation, repair, inspection, and testing of all types of fire suppression systems.

724-658-3751

afs@avenfire.com